

RAM Mounts Quick-Draw Spring-Loaded Holder (RAM-HOL-QD1U) is an open cradle for pistol-grip scanners and handheld computers, holding devices up to 66.7 mm (2.625") wide and 108 mm (4.25") deep. Adjustable side cups and spring tension keep the device in place on a forklift, a picking cart or a packing station, yet the operator can pull it out with one hand. Unlike the bare Quick-Draw body, it comes complete and ready to bolt to a RAM mount.
For a complete set with a screw-down base, see the Quick-Draw mount with flat surface base. To build your own, add a C-size round plate and a medium C-size arm, or the B-size round plate and arm for lighter devices.
Key Features
- Takes long and short devices – height range 50.8–273 mm (2"–10.75"), up to 66.7 mm (2.625") wide and 108 mm (4.25") deep
- Adjustable side cups – set the cups to the width of the scanner handle or handheld body for a snug fit
- Holds against vibration – rugged spring tension keeps the device seated on forklifts and other moving equipment
- One-hand access – the open cradle lets the operator draw the scanner and put it back without releasing a latch
- Standard 4-hole AMPS back – 30 × 38 mm (1.181" × 1.496") pattern for RAM B- and C-size plates; 4× #10-24 screws and nyloc nuts included
On the forklift
Scanning from the seat means the scanner has to be within reach and must not fall out when the truck goes over a dock plate. The Quick-Draw's spring tension holds the device against vibration, and the 4-hole AMPS back takes a RAM ball plate, so the holder can sit on the same arm-and-base system as the truck's tablet or terminal mount.
Compatibility
- Listed by RAM – Zebra: MC9300, MC9400, MC9190-G, MC9190-Z, MC9200, MC2200, MC2700, MC3200, MT2000, DS3500 series, DS3608, LI3608, LI3678, LS3408
- Honeywell: CK75, Dolphin 99GX, Intermec CK3R, CK3X, CK70, CK71, CN70, CN70e
- Datalogic: PowerScan
- Other scanner guns and handhelds up to 66.7 mm wide and 108 mm deep
- RAM plates and ball adapters with the 4-hole AMPS pattern
Technical Specifications
| Part Number | RAM-HOL-QD1U |
|---|---|
| Kit Contents | RAM-HOL-QD1BU Quick-Draw body, assembly hardware |
| Compatible Devices | Scanner guns and handheld computers, e.g. Zebra MC9300/MC9400, MC3200, Honeywell CK75, Datalogic PowerScan |
| Device Size | Height 50.8–273 mm (2"–10.75"); width up to 66.7 mm (2.625"); depth up to 108 mm (4.25") |
| Hole Pattern | 4-hole AMPS 30 × 38 mm (1.181" × 1.496") |
| Materials | High-strength composite |
| Weight | 0.30 kg (0.67 lb) |
| In the Box | Quick-Draw spring-loaded holder, assembly hardware with 4× #10-24 x 5/8" machine screws and 4× #10-24 nyloc nuts |
Equipping reach trucks, counterbalance forklifts or picking carts with scanners? As an Official RAM Mounts Reseller we combine the Quick-Draw with the right base for each truck and quote pricing for the whole warehouse.
Complete RAM mounts with this part (1)
Every complete mount below includes this part.
Questions about RAM-HOL-QD1U
Will my Zebra MC9300 fit?
Yes, RAM lists the MC9300 and MC9400 along with the MC9190 and MC9200. Other devices fit if they are no wider than 66.7 mm and no deeper than 108 mm where they sit in the cradle.
Is it suitable for forklifts?
Yes. The spring tension is made for rugged use, including forklifts. Mount it on a RAM ball plate and arm that suit the truck's frame or overhead guard.
What is the difference to RAM-HOL-QD1BU?
RAM-HOL-QD1BU is only the bare body. RAM-HOL-QD1U is the complete holder built on that body, with the assembly hardware to attach it to an AMPS plate.
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.
