

What's in the box – RAP-395-RMU
RAM Mounts Stack-N-Stow Bait Board with Rail Adapter Kit (RAP-395-RMU) clamps the board to a rail or tube rather than screwing it to the deck. A U-shaped RAM ROD rail adapter wraps around the tube and is screwed to the bulkhead/flat surface base, so that base becomes a rail mount. The board's 3" spline post then drops into it.
On a flat deck the screw-down kit without the rail adapter is enough. A spare rail mount adapter with a base sets up a second rail position.
Key Features
- No holes in the deck – the U-shaped rail adapter (RAM-114RMU) and the base close around a rail with the supplied screws
- Converts back to a deck base – without the adapter, the RAM-114BMPU base screws to a deck or bulkhead
- Plunger retention – the spline post is held until the plunger is released
- Magnetic tool surface – rare-earth magnets keep knife, hooks and lures within reach
- Full-size board – 254 × 330 mm (10" × 13"), 41 mm (1.625") deep
Compatibility
- Rails and tubes on boats and kayaks – send us your rail diameter to confirm the fit
- Pipes and extension poles 25.4 mm (1") in diameter on the board
Technical Specifications
| Part Number | RAP-395-RMU |
|---|---|
| Kit Contents | RAP-395-PU bait board with 3" spline post, RAM-114BMPU bulkhead/flat surface base, RAM-114RMU rail mount adapter |
| Tray Dimensions | 254 × 330 mm (10" × 13"), 41 mm (1.625") deep |
| Post Length | 76 mm (3") |
| Hole Pattern | Base 33 × 81 mm (1.3" × 3.19") |
| Mounting Type | Rail |
| Materials | High-strength composite |
| Weight | 1.07 kg (2.35 lb) |
| In the Box | Bait board, 3" spline post, bulkhead/flat surface base, rail mount adapter, assembly hardware |
Fitting bait stations to the rails of a charter fleet? We are an Official RAM Mounts Reseller and quote complete rail-mounted kits per boat.
Questions about RAP-395-RMU
How does it attach to the rail?
The U-shaped adapter goes around the rail and is screwed to the bulkhead/flat surface base, which then holds the board's spline post.
Will it fit my rail?
Send us the rail diameter and we will confirm the fit before you order.
Can the base be used on a flat deck later?
Yes, without the rail adapter it screws to a deck or bulkhead like a normal RAM ROD base.
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.


