

RAM Mounts GDS Key-Lock Dock for ET5x 10.1" with USB and DB9 (RAM-HOL-ZE11PDKL-DB9U) locks the 10.1" Zebra ET5x, fitted with Rugged Frame, into the vehicle and connects it at the same time. The DB9 male port and USB 2.0 Type-A cable stay wired in the cab, power reaches the tablet through pogo pins, and the two supplied keys decide who may remove it.
📦 What's in the box – RAM-HOL-ZE11PDKL-DB9U
- GDS key-locking power + data & DB9 dock for ET5x 10.1" – 5.5 mm DC jack, USB 2.0 Type-A cable, DB9 male
- Keys – 2
- Side accessory bracket – takes a RAM 2-hole diamond base and gives cable strain relief
- USB Type-A cable clamp housing – holds the USB connection in place
- Mounting hardware – 4× #8-32 x 5/8", 2× #8-32 x 1/2" and 4× #10-24 x 5/8" machine screws, 6× #8-32 and 4× #10-24 nyloc nuts
- Cable ties – 8 small, 2 large
💡 Connect it to the vehicle supply with the 10–32 V charger or the 20–60 V charger. A C-size VESA 75 plate and short arm keep the tablet close to the operator; a diamond ball base on the 2-hole plate carries a phone. Ethernet instead of DB9: RAM-HOL-ZE11PDKL-RJ45AU.
Key Features
- Key-locked in the cab – 2 keys included; deters theft when the vehicle is left
- DB9 and USB stay wired – DB9 male connector and USB 2.0 Type-A cable, 480 Mbps and 900 mA peripheral output
- No cable to the tablet – pogo-pin contacts charge it from the 5.5 mm DC jack
- Second device on board – built-in 2-hole plate and side bracket for RAM diamond bases
- Scanner keeps working – the back cut-out leaves the scan window open and fits the PowerPack battery and rotating hand strap
Compatibility
- Zebra ET5x 10.1" with Rugged Frame
- Zebra rotating hand strap; not the SG-ET5X-SFSTRAP1-01 strap
- RAM C- and D-size bases with AMPS 4-hole or VESA 75 × 75 mm patterns
- RAM 2-hole diamond bases
Technical Specifications
| Part Number | RAM-HOL-ZE11PDKL-DB9U |
|---|---|
| Compatible Devices | Zebra ET5x 10.1" with Rugged Frame |
| Locking | Key lock, 2 keys |
| Power | 5.5 mm DC input; charging via pogo pins |
| Data Ports | 1× USB 2.0 Type-A (cable); DB9 male |
| Peripheral Output | 900 mA |
| Transfer Speed | 480 Mbps |
| Hole Pattern | AMPS 4-hole 30 × 38 mm (1.181" × 1.496"); VESA 75 × 75 mm; built-in 2-hole plate for a diamond base |
| Materials | High-strength composite |
| Weight | 0.96 kg (2.11 lb) |
| In the Box | Key-locking dock, 2 keys, side bracket, USB-A cable clamp housing, screws and nuts, cable ties |
Upgrading terminals in utility or service trucks to the ET5x 10.1" while keeping DB9 devices? As an Official RAM Mounts Reseller we deliver docks, chargers and arms in matched sets and quote per vehicle or per project.
Questions about RAM-HOL-ZE11PDKL-DB9U
What is the difference to RAM-HOL-ZE11PDCL-DB9U?
Only the lock: this dock uses a key lock with two keys, the CL version a combination lock. Ports and mounting are the same.
Can a phone be mounted on the same dock?
Yes. Fix a RAM 2-hole diamond base to the built-in plate or the side bracket and add an arm and phone holder.
Do I need anything else to install it?
A power source for the 5.5 mm DC jack – for example a GDS hardwire charger – and a C- or D-size RAM base with arm for the AMPS or VESA pattern.
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.