

What's in the box – RAP-B-191AU
RAM Mounts Mirror-Mate Double Ball Mount for Chrysler, Ford & Toyota (RAP-B-191AU) uses the mirror button on the windscreen as its anchor – no drilling, no suction cup. The ball base slides onto the factory button and repeats it on the cabin side, so the original rear-view mirror goes straight back on. A medium arm and a composite diamond base with 2-hole AMPS complete the mount for a phone, GPS, camera display or radar detector.
Most RAM cradles bolt straight onto the 2-hole AMPS diamond base; for ball-mounted holders such as the X-Grip phone holder, remove the diamond base and fit the holder to the arm. A short B-size arm keeps the device tighter to the mirror.
Key Features
- Anchors on the mirror button – the ball base fits over the factory windscreen button of Chrysler, Ford and Toyota vehicles – nothing to drill or stick
- Mirror goes back on – a replica button on the cabin side carries the original rear-view mirror
- Standard AMPS top – composite diamond base with the 2-hole AMPS pattern, 48.6 mm (1.912") apart
- Medium composite arm – 76 mm (3") socket to socket; rubber ball joints damp vibration and set the viewing angle
- Light – about 0.17 kg for the complete composite mount
In the cab
Take the mirror off, slide the Mirror-Mate base over the windscreen button, tighten it and refit the mirror on the copy of the button. The device then hangs close to the mirror, high in the driver's field of view. Position it so it keeps out of airbag deployment areas and does not block the view of the road.
Compatibility
- Chrysler, Ford and Toyota vehicles with a windscreen-mounted mirror button
- RAM cradles and holders with the 2-hole AMPS pattern (48.6 mm / 1.912")
- All RAM B-size (25.4 mm / 1") ball holders, fitted directly to the arm
Technical Specifications
| Part Number | RAP-B-191AU |
|---|---|
| Kit Contents | RAP-B-369AU Mirror-Mate ball base, RAP-B-201U arm, RAP-B-238U diamond ball base |
| Ball Size | B, 25.4 mm (1") |
| Arm | Medium, 76 mm (3") socket to socket (composite) |
| Hole Pattern | 2-hole AMPS 48.6 mm (1.912") |
| Mounting Type | Mirror button |
| Load Capacity | 0.9 kg (2 lb) standard use; 0.45 kg (1 lb) heavy-duty use |
| Materials | High-strength composite |
| Weight | 0.17 kg (0.37 lb) |
| In the Box | Mirror-Mate ball base, medium double socket arm, diamond ball base |
Mixed fleet of Ford, Toyota and Chrysler vehicles? As an Official RAM Mounts Reseller we match the right Mirror-Mate base to each model and supply complete mounts at fleet pricing.
Questions about RAP-B-191AU
Do I need to drill anything to fit RAP-B-191AU?
No. The base clamps around the factory mirror button on the windscreen, and the mirror is then refitted on the replica button.
Which vehicles is it made for?
Chrysler, Ford and Toyota vehicles. GM vehicles use RAP-B-191BU and the Dodge Sprinter van uses RAP-B-191CU.
What can I attach?
Light devices up to 0.9 kg (2 lb) – a phone, GPS, camera display or radar detector – in a RAM cradle with 2-hole AMPS or a B-size ball holder.
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.


