

What's in the box – RAP-390-BMPU
RAM Mounts Tube Jr. Rod Holder with Bulkhead/Flat Surface Base (RAP-390-BMPU) gives you one base for two kinds of surface: screw it flat to a deck or upright to a bulkhead or console side. A spring plunger holds the spline post in the base, so the rod holder cannot lift out until you release it. The post is 152 mm (6") long.
Fit a spare bulkhead/flat surface base on the other side of the boat and move the holder as the drift changes. For a lower rod, the 4" post version uses the same base.
Key Features
- Deck or wall – the combination base mounts on a flat deck or on a vertical surface
- Plunger retention – the holder only comes out of the base once the plunger is released
- Standard pattern – four holes in a 33 × 81 mm (1.3" × 3.19") pattern
- Tall post – 152 mm (6") spline post for clearance over gunwales and coamings
- Versatile holder – the Tube Jr. suits left- and right-handed anglers with spinning or level-wind reels
Compatibility
- Flat decks and vertical bulkheads on power boats and kayaks
- Fishing rods with spinning or level-wind reels
Technical Specifications
| Part Number | RAP-390-BMPU |
|---|---|
| Kit Contents | RAP-390U Tube Jr. with 6" spline post, RAM-114BMPU bulkhead/flat surface base |
| Post Length | 152 mm (6") |
| Hole Pattern | 4 holes, 33 × 81 mm (1.3" × 3.19") |
| Materials | High-strength composite |
| Mounting Type | Drill-down, horizontal or vertical |
| Weight | 0.45 kg (1.00 lb) |
| In the Box | Tube Jr. rod holder with 6" spline post, bulkhead/flat surface base |
Families and fishing clubs equipping several boats alike? As an Official RAM Mounts Reseller we supply identical bases for every position so holders swap between boats.
Questions about RAP-390-BMPU
Can the base go on a vertical panel?
Yes. The combination base is made for flat decks and for vertical surfaces such as a bulkhead or console side.
How do I remove the rod holder?
Release the plunger on the base, then lift the Tube Jr. out. It is held in until you do.
What is the difference to RAP-390-BU?
RAP-390-BU has the plain bulkhead base with an open socket, intended for vertical surfaces. This kit's base also works flat and adds the plunger that keeps the holder in.
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.

