

Many handheld radios already wear a belt clip – the RAM Mounts Universal Belt Clip Holder (RAM-HOL-BC1U) uses that clip to hold the device on a RAM mount. There is no device-specific cradle to match: the composite holder takes belt-clipped electronics with a width range of up to 62.2 mm (2.45"). Its 2-hole AMPS back fits RAM's diamond bases, and RAM uses it in kits for yoke clamps, handlebars, rails, suction cups and dashboards.
📦 What's in the box – RAM-HOL-BC1U
- Universal belt clip holder – high-strength composite, 2-hole AMPS 48.6 mm (1.912")
- Machine screws, #8-32 – 2× 1/2", 2× 5/8", 2× 3/4"
- Nyloc nuts, #8-32 – to secure the screws
- Lanyard clip – for a tether to the device
💡 Ready-made kits: drill-down, Twist-Lock suction cup, 1" rail, handlebar U-bolt and flex adhesive dashboard mounts. For GDS Uni-Conn devices, see the belt clip holder with release button.
Key Features
- Uses the device's own belt clip – no form-fit cradle needed – radios and other electronics with a belt clip hook on
- Up to 62.2 mm wide – RAM gives the holder's width range as 62.2 mm (2.45") maximum
- Fits RAM diamond bases – 2-hole AMPS 48.6 mm (1.912"), with #8-32 screws in three lengths and nyloc nuts
- Tether point included – a lanyard clip comes in the pack
- Light composite – high-strength composite, 0.07 kg (0.15 lb)
In the cockpit
RAM offers this holder on a composite yoke clamp mount, which keeps a handheld radio within reach of the pilot without a dedicated cradle. Check your aircraft's and aviation authority's rules on where equipment may be fitted before you fly.
Compatibility
- Handheld radios and other electronics fitted with a belt clip, width range up to 62.2 mm (2.45")
- RAM diamond bases and mounts with the 2-hole AMPS pattern (48.6 mm / 1.912")
Technical Specifications
| Part Number | RAM-HOL-BC1U |
|---|---|
| Compatible Devices | Radios and electronics with a belt clip |
| Holder Width Range | Up to 62.2 mm (2.45") |
| Hole Pattern | 2-hole AMPS, 48.6 mm (1.912") |
| Materials | High-strength composite |
| Weight | 0.07 kg (0.15 lb) |
| In the Box | Holder, #8-32 machine screws (1/2", 5/8", 3/4"), #8-32 nyloc nuts, lanyard clip |
Mounting radios across a flying club or a fleet of service vehicles? As an Official RAM Mounts Reseller we supply this holder with the base each installation needs.
Complete RAM mounts with this part (7)
Every complete mount below includes this part.
Universal Belt Clip Holder with Drill-Down Mount, B-Size
63,03 € +VATOut of stock
Handlebar U-Bolt Mount with Universal Belt Clip Holder, B-Size, Medium Arm
74,88 € +VATOut of stock
Twist-Lock Suction Cup Mount with Universal Belt Clip Holder, B-Size, Medium Arm
83,89 € +VATOut of stock
Composite Yoke Clamp Mount with Universal Belt Clip Holder, B-Size, Medium Arm
73,70 € +VATOut of stock
Universal Belt Clip Holder with Composite Drill-Down Mount, B-Size
49,53 € +VATOut of stock
Composite 1" Rail Mount with Universal Belt Clip Holder, B-Size
50,24 € +VATOut of stock
Belt Clip Holder with Snap-Link Flex Adhesive Dashboard Mount
41,94 € +VATOut of stock
Questions about RAM-HOL-BC1U
Which devices does RAM-HOL-BC1U hold?
Radios and other electronics that have a belt clip. The holder works with the device's own clip; RAM states a width range of up to 62.2 mm (2.45").
Can I mount it on an aircraft yoke?
Yes, RAM sells it as a yoke clamp kit (RAP-B-121-BC1U). Follow your aircraft's and authority's rules on mounting equipment.
What is the lanyard clip for?
It lets you add a tether so the device stays attached if it comes off the holder.
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.