RAM Mounts X-Grip Large Phone Mount with Snap-Link Tough-Claw (RAM-HOL-UN10-400U) clamps onto a bar or tube by hand and holds a large phone right above it. The small Tough-Claw grips round, square and irregular tubes from 15.9 to 29 mm, and the X-Grip clicks onto it with a Snap-Link connection instead of an arm – a short, compact set-up for handlebars, roll bars, kayak rails and aircraft yokes.
Riding a high-powered motorcycle? The version with Vibe-Safe damper adds vibration isolation. For thicker tubes, see the low-profile medium Tough-Claw kit.
Key Features
-
Clamps without tools – the small Tough-Claw closes on round, square and odd-shaped tubes 15.9–29 mm (0.625"–1.14") in diameter
-
Protects the tube – rubber pads give a stable grip and keep the clamp from marking the surface
-
Compact Snap-Link joint – the X-Grip connects directly to the clamp's pin-lock pattern via a 3/4" Snap-Link socket, with no separate arm
-
Large phones in cases – the X-Grip opens to 44.5–114.3 mm (1.75"–4.5") for devices up to 22.2 mm (0.875") thick
-
Tether included – the optional tether keeps the phone attached on rough trails
On the handlebar, the rail or the yoke
The clamp goes on and comes off without tools, and its rubber pads protect painted or polished tubes. That makes it easy to move the phone between a bicycle, a dirt bike, an ATV or UTV and a kayak. On an aircraft yoke, make sure the phone does not interfere with the controls, and follow your aircraft's and authority's rules for mounted equipment.
Compatibility
- Handlebars, rails, roll bars, kayak rails and aircraft yokes 15.9–29 mm (0.625"–1.14") in diameter
- Motorcycles, bicycles, ATVs, UTVs and dirt bikes
- Phones 44.5–114.3 mm (1.75"–4.5") wide and up to 22.2 mm (0.875") deep, measured with their case
Technical Specifications
| Part Number |
RAM-HOL-UN10-400U |
| Kit Contents |
RAM-HOL-UN10U X-Grip holder, RAP-400NBU small Tough-Claw with pin-lock pattern |
| Device Size |
Width 44.5–114.3 mm (1.75"–4.5"); depth up to 22.2 mm (0.875"), measured with the case |
| Clamp Range |
15.9–29 mm (0.625"–1.14") diameter |
| Connection |
RAM Snap-Link 3/4" |
| Load Capacity |
0.23 kg (0.5 lb) |
| Materials |
High-strength composite, stainless steel |
| Mounting Type |
Handlebar / rail clamp |
| Weight |
0.23 kg (0.50 lb) |
| In the Box |
X-Grip large phone holder, small Tough-Claw clamp base, optional tether, glue tube |
Kitting out a rental fleet of bikes, ATVs or kayaks, or a flying club? As an Official RAM Mounts Reseller we supply the same clamp mount in quantity and quote project pricing.