

What's in the box – RAM-B-121-238U
RAM Mounts Yoke Clamp Mount with Diamond Plate (RAM-B-121-238U) is the bare mount without a device holder: a hand-tightened yoke clamp, a medium B-size arm and a small diamond plate with the 2-hole AMPS pattern. Bolt your own cradle to the plate and the whole set clamps to an aircraft yoke or any round tube within its range. It is also the mounting half of several RAM yoke kits for Garmin units, phones and radios.
Want more reach? The long-arm version adds 59 mm between the sockets. If your cradle has the 4-hole AMPS pattern, choose the round-plate version instead, or add a B-size round plate.
Key Features
- Clamps without tools – the yoke clamp closes around tubes from 15.9 to 31.8 mm (0.625"–1.25") and is tightened with a hand knob
- Ball aligned with the tube – the clamp's ball sits at a right angle to the clamp face, so the arm runs along the yoke or rail rather than sticking out from it
- Takes most AMPS cradles – the 61.7 × 33.3 mm diamond plate has two holes 48.6 mm (1.912") apart, the 2-hole AMPS pattern used on many RAM and third-party holders
- Medium B-size arm – 76 mm (3") between sockets, with one knob setting both ball joints
- Aluminium build – base, arm and plate are marine-grade aluminium
On the control yoke
The clamp closes around the yoke shaft and is tightened by hand with a knob, so the mount can be fitted to a rented or shared aircraft and removed again after the flight. Its ball points along the tube, which keeps the arm close to the yoke. Check your aircraft's and aviation authority's rules before fitting equipment to the controls.
Compatibility
- Aircraft yokes, handlebars and rails 15.9–31.8 mm (0.625"–1.25") in diameter
- RAM and third-party cradles with the 2-hole AMPS pattern (48.6 mm / 1.912")
- All RAM B-size (25.4 mm / 1") holders with ball, arms and bases
Technical Specifications
| Part Number | RAM-B-121-238U |
|---|---|
| Kit Contents | RAM-B-121BU yoke clamp base, RAM-B-201U arm, RAM-B-238U diamond plate |
| Clamp Range | 15.9–31.8 mm (0.625"–1.25") diameter |
| Ball Size | B, 25.4 mm (1") |
| Arm | Medium, 76 mm (3") socket to socket |
| Plate Size | 61.7 × 33.3 mm (2.43" × 1.31") |
| Hole Pattern | 2-hole AMPS, 48.6 mm (1.912") |
| Load Capacity | 0.9 kg (2 lb) standard use; 0.45 kg (1 lb) heavy-duty use |
| Materials | Marine-grade aluminium |
| Mounting Type | Rail / yoke clamp |
| Weight | 0.32 kg (0.71 lb) |
| In the Box | Yoke clamp base with ball, medium double socket arm, diamond plate with ball |
Building yoke mounts for several aircraft or a mix of devices? As an Official RAM Mounts Reseller we stock the base kit and the matching cradles, so every installation uses the same parts.
Complete RAM mounts with this part (3)
Every complete mount below includes this part.
Questions about RAM-B-121-238U
Does RAM-B-121-238U include a device holder?
No. It is the clamp, arm and diamond plate only. You add a cradle with the 2-hole AMPS pattern, or replace the diamond plate with a RAM holder that has its own B-size ball.
What is the difference to RAM-B-121-C-238U?
Only the arm. This kit has the medium 76 mm arm; RAM-B-121-C-238U has the long 135 mm arm for more distance between the yoke and the device.
Will it fit a handlebar instead of a yoke?
Yes, if the tube is between 15.9 and 31.8 mm in diameter. The clamp works on any round rail in that range.
Recently Viewed
Don't forget! The products that you viewed. Add it to cart now.
People Also Bought
Here’s some of our most similar products people are buying. Click to discover trending style.





