How-to

Calibrate the Zebra ZD421: SmartCal and manual calibration

Set the movable sensor for your labels, run SmartCal with two buttons, and use manual calibration when the ZD421 still skips labels.

10 min Difficulty: Easy Updated: By SCANSHOP team
In this guide

    Calibration tells the ZD421 how long your labels are and where each one starts. Without it, the printer may skip labels, print across the gaps or stop with a media-out light although labels are loaded. Most of the time the automatic SmartCal is enough; for difficult labels there is a manual calibration.

    When to calibrate

    • When you set up a new printer.
    • When you change to a different label type, size or supplier.
    • After a factory reset.
    • When labels skip, print across the gaps or the printer reports media out with labels loaded.

    A new roll of the same labels from the same batch needs no calibration. Press FEED once or twice after loading it, and the printer lines up the labels by itself.

    Know your labels

    Label type How the printer finds the start Sensor position
    Gap labels (die-cut on a liner) Detects the gap between labels Default position
    Black mark labels Measures from one black mark on the back to the next Over the mark
    Notched or punched labels Detects the notch or hole Over the notch or hole
    Continuous labels or receipt paper No gaps; length comes from the driver or software Default position

    On a ZD421t or ZD421c, load the ribbon before you calibrate.

    Set the movable sensor

    The movable media sensor sits under the labels. It slides sideways along an alignment key, and an alignment arrow shows its position.

    1. Slide the release latches towards the front and open the cover.
    2. Flip the labels up so you can see the sensor and the back of the labels.
    3. Gap labels and continuous media: set the arrow to the default position marked on the alignment key. Gap sensing only works while the arrow points to a position on the key.
    4. Black mark, notched or punched labels: move the arrow to the middle of the mark or notch. Keep it as far from the label edge as you can, while the mark still covers the whole sensor window.
    5. Lower the labels and close the cover until the latches click.
    12345
    Labels seen from below, printer front at the bottom. Left: gap labels. Right: black mark labels. 1 Gap between labels, over the sensor · 2 Alignment arrow at the default position on the alignment key · 3 Black mark on the back of the liner · 4 Sensor window, fully covered by the mark · 5 Alignment arrow moved to the middle of the mark. Simplified schematic.
    Tip

    Labels can shift sideways by about 1 mm while printing, and notches at the edge get damaged in handling. That is why the sensor should sit well inside the mark, not on its edge.

    Run SmartCal

    1. Switch the printer on and wait until the STATUS light is steady green.
    2. Press and hold PAUSE + CANCEL for 2 seconds, then let go.
    3. The printer feeds and measures a few labels. It sets the sensor levels, works out the label type and measures the length.
    4. When STATUS is steady green again, calibration is finished.

    Calibrate manually if SmartCal fails

    Use manual calibration when SmartCal doesn't recognise your labels, for example with pre-printed liners or unusual black marks. The printer measures the bare liner first and then a label.

    1. With labels loaded and the printer on, hold PAUSE for 2 seconds. All lights flash, then STATUS stays steady amber: the printer is in Advanced Mode with Manual Media Calibration selected.
    2. Press PAUSE once to start. The SUPPLIES light flashes amber, then the PAUSE light flashes.
    3. Open the printer and check the sensor position (see above). On pre-printed media, place the sensor where there is little printing on the label front or liner back.
    4. Peel about 80 mm of labels off the liner.
    5. Lay the bare liner over the platen roller (the drive roller), with the front edge of the first remaining label under the media guides.
    6. Close the printer and press PAUSE once. The SUPPLIES light flashes while the printer measures the liner; when it is done, the PAUSE light flashes.
    7. Open the printer and move the labels so that a label sits directly over the movable sensor. Close the printer.
    8. Press PAUSE once. The printer feeds and measures several labels. When STATUS is steady green, calibration is complete.

    If the printer does not return to steady green, move the sensor slightly and repeat. To leave Advanced Mode without calibrating, press CANCEL. Zebra's video shows a ZD411; the steps are the same on the ZD421.

    ZD411/ZD421/ZD611/ZD621 Manual Media Calibration

    Video: Zebra Technologies

    Check the result

    Press FEED once. The printer should advance exactly one label. Then print a test label from your software and check that it lands on the label, not across the gap. In the driver, the label size must match the labels you have loaded.

    Symptoms and fixes

    What you see Likely cause Fix
    Blank labels between printed ones, or print runs across the gap Not calibrated for these labels, or sensor in the wrong place Set the sensor for your label type and run SmartCal
    Start of print moves from label to label Calibration doesn't match the labels, or the platen roller slips Run SmartCal, then manual calibration; clean the platen roller
    STATUS and SUPPLIES red with labels loaded Sensor can't see the labels or is dirty Check the sensor position, clean the sensor, calibrate
    Printer was set for gap labels, continuous media now loaded Sensor setting doesn't match the media Sensor to the default position, then SmartCal
    Black mark labels skip or stop Sensor still in the default position Move the arrow to the middle of the mark and calibrate

    For the meaning of each light, see ZD421 lights and errors. New to the printer? Start with the ZD421 setup guide.

    Frequently asked questions

    How do I calibrate a Zebra ZD421?

    With labels loaded and STATUS steady green, hold PAUSE and CANCEL together for 2 seconds. The printer feeds a few labels and calibrates itself (SmartCal).

    Why does my ZD421 skip labels after calibration?

    Usually the movable sensor is in the wrong position for your labels. Set it to the default position for gap labels, or over the mark for black mark labels, and calibrate again.

    Do I need to calibrate after every new roll?

    No. The same labels from the same batch need no new calibration. Press FEED once or twice after loading.

    Why does my ZD421 feed several labels when I press FEED?

    One press of FEED should advance exactly one label. If it feeds more, the printer is not calibrated for these labels or the sensor is not over the gaps or marks. Set the sensor and run SmartCal.

    Was this guide helpful?

    Used in this guide

    Compatible consumables and accessories for the Zebra ZD421.

    Compatible ribbons

    ProductWidth Length Type Ink sideCorePrice
    Zebra 2300 Wax Ribbon 110 mm × 74 m, Out, Black (02300GS11007) Zebra 2300 Wax Ribbon 110 mm × 74 m02300GS11007110 mm 74 m Wax Outside12.7 mm2,76 €+VATIn stock
    Zebra 3200 Wax/Resin Ribbon 110 mm × 74 m, Out, Black (03200GS11007) Zebra 3200 Wax/Resin Ribbon 110 mm × 74 m03200GS11007110 mm 74 m Wax/Resin Outside12.7 mm5,33 €+VATIn stock
    Zebra 5095 Resin Ribbon 64 mm × 74 m, Out, Black (05095GS06407) Zebra 5095 Resin Ribbon 64 mm × 74 m05095GS0640764 mm 74 m Resin Outside12.7 mm5,10 €+VATIn stock
    Zebra 2300 Wax Ribbon 64 mm × 74 m, Out, Black (02300GS06407) Zebra 2300 Wax Ribbon 64 mm × 74 m02300GS0640764 mm 74 m Wax Outside12.7 mm1,61 €+VATIn stock
    Zebra 5095 Resin Ribbon 110 mm × 74 m, Out, Black (05095GS11007) Zebra 5095 Resin Ribbon 110 mm × 74 m05095GS11007110 mm 74 m Resin Outside12.7 mm8,75 €+VATIn stock
    Zebra 2300 Wax Ribbon 84 mm × 74 m, Out, Black (02300GS08407) Zebra 2300 Wax Ribbon 84 mm × 74 m02300GS0840784 mm 74 m Wax Outside12.7 mm2,03 €+VATIn stock
    Zebra 3200 Wax/Resin Ribbon 56.9 mm × 74 m, Out, Black (800132-102) Zebra 3200 Wax/Resin Ribbon 56.9 mm × 74 m800132-10256.9 mm 74 m Wax/Resin Outside12.7 mm3,07 €+VATIn stock
    Zebra 2300 Wax Ribbon 56.9 mm × 74 m, Out, Black (800132-002) Zebra 2300 Wax Ribbon 56.9 mm × 74 m800132-00256.9 mm 74 m Wax Outside12.7 mm2,44 €+VATIn stock
    Zebra 2300 Wax Ribbon 110 mm × 300 m, Out, Black (02300BK11030) Zebra 2300 Wax Ribbon 110 mm × 300 m02300BK11030110 mm 300 m Wax Outside25.4 mm8,30 €+VATIn stock
    Zebra 5095 Resin Ribbon 84 mm × 74 m, Out, Black (05095GS08407) Zebra 5095 Resin Ribbon 84 mm × 74 m05095GS0840784 mm 74 m Resin Outside12.7 mm6,69 €+VATIn stock
    Zebra 5095 Resin Ribbon 56.9 mm × 74 m, Out, Black (800132-202) Zebra 5095 Resin Ribbon 56.9 mm × 74 m800132-20256.9 mm 74 m Resin Outside12.7 mm4,65 €+VATIn stock
    Zebra 3200 Wax/Resin Ribbon 64 mm × 74 m, Out, Black (03200GS06407) Zebra 3200 Wax/Resin Ribbon 64 mm × 74 m03200GS0640764 mm 74 m Wax/Resin Outside12.7 mm3,12 €+VATIn stock
    Zebra 3200 Wax/Resin Ribbon 110 mm × 300 m, Out, Black (03200BK11030) Zebra 3200 Wax/Resin Ribbon 110 mm × 300 m03200BK11030110 mm 300 m Wax/Resin Outside25.4 mm16,98 €+VATIn stock
    Zebra 2300 Wax Ribbon 33 mm × 74 m, Out, Black (02300GS03307) Zebra 2300 Wax Ribbon 33 mm × 74 m02300GS0330733 mm 74 m Wax Outside12.7 mm1,19 €+VATIn stock
    Zebra 2300 Wax Ribbon 60 mm × 300 m, Out, Black (02300BK06030) Zebra 2300 Wax Ribbon 60 mm × 300 m02300BK0603060 mm 300 m Wax Outside25.4 mm4,52 €+VATIn stock
    Zebra 2300 Wax Ribbon 83 mm × 300 m, Out, Black (02300BK08330) Zebra 2300 Wax Ribbon 83 mm × 300 m02300BK0833083 mm 300 m Wax Outside25.4 mm6,26 €+VATIn stock
    Zebra 5095 Resin Ribbon 60 mm × 300 m, Out, Black (05095BK06030) Zebra 5095 Resin Ribbon 60 mm × 300 m05095BK0603060 mm 300 m Resin Outside25.4 mm18,87 €+VATIn stock
    Zebra 5095 Resin Ribbon 110 mm × 300 m, Out, Black (05095BK11030) Zebra 5095 Resin Ribbon 110 mm × 300 m05095BK11030110 mm 300 m Resin Outside25.4 mm34,59 €+VATIn stock
    Zebra 2300 Wax Ribbon 110 mm × 300 m, Out, Black (02300GT11030) Zebra 2300 Wax Ribbon 110 mm × 300 m02300GT11030110 mm 300 m Wax Outside25.4 mm8,72 €+VATIn stock
    Zebra 3300 Wax/Resin Ribbon 84 mm × 74 m, Out, Black (03300GS08407) Zebra 3300 Wax/Resin Ribbon 84 mm × 74 m03300GS0840784 mm 74 m Wax/Resin Outside12.7 mm2,80 €+VATIn stock
    Zebra 3200 Wax/Resin Ribbon 60 mm × 300 m, Out, Black (03200BK06030) Zebra 3200 Wax/Resin Ribbon 60 mm × 300 m03200BK0603060 mm 300 m Wax/Resin Outside25.4 mm9,24 €+VATIn stock
    Zebra 5095 Resin Ribbon 83 mm × 300 m, Out, Black (05095BK08330) Zebra 5095 Resin Ribbon 83 mm × 300 m05095BK0833083 mm 300 m Resin Outside25.4 mm26,10 €+VATIn stock
    Zebra 3300 Wax/Resin Ribbon 110 mm × 74 m, Out, Black (03300GS11007) Zebra 3300 Wax/Resin Ribbon 110 mm × 74 m03300GS11007110 mm 74 m Wax/Resin Outside12.7 mm3,65 €+VATIn stock
    Zebra 5095 Resin Ribbon 33 mm × 74 m, Out, Black (800132-201) Zebra 5095 Resin Ribbon 33 mm × 74 m800132-20133 mm 74 m Resin Outside12.7 mm2,70 €+VATIn stock
    Zebra 3200 Wax/Resin Ribbon 83 mm × 300 m, Out, Black (03200BK08330) Zebra 3200 Wax/Resin Ribbon 83 mm × 300 m03200BK0833083 mm 300 m Wax/Resin Outside25.4 mm12,81 €+VATIn stock
    Zebra 5095 Resin Ribbon 56.9 mm × 74 m, Out, Black (05095ZD25707) Zebra 5095 Resin Ribbon 56.9 mm × 74 m05095ZD2570756.9 mm 74 m Resin Outside12.7 mm4,65 €+VATIn stock
    Zebra 2300 Wax Ribbon 33 mm × 74 m, Out, Black (800132-001) Zebra 2300 Wax Ribbon 33 mm × 74 m800132-00133 mm 74 m Wax Outside12.7 mm1,41 €+VATIn stock
    Zebra 2300 Wax Ribbon 56.9 mm × 74 m, Out, Black (02300ZD25707) Zebra 2300 Wax Ribbon 56.9 mm × 74 m02300ZD2570756.9 mm 74 m Wax Outside12.7 mm2,44 €+VATIn stock
    Zebra 3200 Wax/Resin Ribbon 84 mm × 74 m, Out, Black (03200GS08407) Zebra 3200 Wax/Resin Ribbon 84 mm × 74 m03200GS0840784 mm 74 m Wax/Resin Outside12.7 mm4,07 €+VATIn stock
    Zebra 3300 Wax/Resin Ribbon 64 mm × 74 m, Out, Black (03300GS06407) Zebra 3300 Wax/Resin Ribbon 64 mm × 74 m03300GS0640764 mm 74 m Wax/Resin Outside12.7 mm2,13 €+VATIn stock
    Zebra 3200 Wax/Resin Ribbon 33 mm × 74 m, Out, Black (800132-101) Zebra 3200 Wax/Resin Ribbon 33 mm × 74 m800132-10133 mm 74 m Wax/Resin Outside12.7 mm1,78 €+VATOut of stock View
    Zebra Image Lock Resin Ribbon 60 mm × 300 m, Out, Black (74776) Zebra Image Lock Resin Ribbon 60 mm × 300 m7477660 mm 300 m Resin Outside25.4 mm105,63 €+VATOut of stock View
    Zebra 5319 Wax Ribbon 110 mm × 300 m, Out, Gold (05319GD11030) Zebra 5319 Wax Ribbon 110 mm × 300 m05319GD11030110 mm 300 m Wax Outside25.4 mm74,66 €+VATOut of stock View
    Zebra Image Lock Resin Ribbon 110 mm × 300 m, Out, Black (74917) Zebra Image Lock Resin Ribbon 110 mm × 300 m74917110 mm 300 m Resin Outside25.4 mm193,66 €+VATOut of stock View
    Zebra Image Lock Resin Ribbon 64 mm × 74 m, Out, Black (74941) Zebra Image Lock Resin Ribbon 64 mm × 74 m7494164 mm 74 m Resin Outside12.7 mm33,00 €+VATOut of stock View
    Zebra Image Lock Resin Ribbon 80 mm × 300 m, Out, Black (74777) Zebra Image Lock Resin Ribbon 80 mm × 300 m7477780 mm 300 m Resin Outside25.4 mm140,85 €+VATOut of stock View
    Zebra 3200 Wax/Resin Ribbon 110 mm × 300 m, Out, Black (03200GT11030) Zebra 3200 Wax/Resin Ribbon 110 mm × 300 m03200GT11030110 mm 300 m Wax/Resin Outside25.4 mm17,84 €+VATOut of stock View
    Zebra Image Lock Resin Ribbon 84 mm × 74 m, Out, Black (74942) Zebra Image Lock Resin Ribbon 84 mm × 74 m7494284 mm 74 m Resin Outside12.7 mm43,30 €+VATOut of stock View
    Zebra 3200 Wax/Resin Ribbon 56.9 mm × 74 m, Out, Black (03200ZD25707) Zebra 3200 Wax/Resin Ribbon 56.9 mm × 74 m03200ZD2570756.9 mm 74 m Wax/Resin Outside12.7 mm3,07 €+VATOut of stock View
    TSC 8050-SWX Wax Ribbon 110 mm × 300 m, Out, Black (P159049-001) TSC 8050-SWX Wax Ribbon 110 mm × 300 mP159049-001110 mm 300 m Wax Outside25.4 mm4,69 €+VATIn stock
    Honeywell TMX 2010 / HP06 Wax/Resin Ribbon 60 mm × 300 m, Out, Black (I90677-0) Honeywell TMX 2010 / HP06 Wax/Resin Ribbon 60 mm × 300 mI90677-060 mm 300 m Wax/Resin Outside25.4 mm68,95 €+VATOut of stock View
    Honeywell TMX 2010 / HP06 Wax/Resin Ribbon 110 mm × 300 m, Out, Black (1-970700-05-0) Honeywell TMX 2010 / HP06 Wax/Resin Ribbon 110 mm × 300 m1-970700-05-0110 mm 300 m Wax/Resin Outside25.4 mm126,38 €+VATOut of stock View
    Honeywell TMX 3710 / HR03 Resin Ribbon 60 mm × 300 m, Out, Black (I90679-0) Honeywell TMX 3710 / HR03 Resin Ribbon 60 mm × 300 mI90679-060 mm 300 m Resin Outside25.4 mm155,74 €+VATOut of stock View
    Honeywell TMX 3710 / HR03 Resin Ribbon 110 mm × 300 m, Out, Black (1-970657-01-0) Honeywell TMX 3710 / HR03 Resin Ribbon 110 mm × 300 m1-970657-01-0110 mm 300 m Resin Outside25.4 mm285,53 €+VATOut of stock View
    TSC 8600-SRE Resin Ribbon 110 mm × 300 m, Out, Black (P159053-001) TSC 8600-SRE Resin Ribbon 110 mm × 300 mP159053-001110 mm 300 m Resin Outside25.4 mm24,09 €+VATOut of stock View
    TSC 8550-SWR Wax/Resin Ribbon 110 mm × 300 m, Out, Black (P159051-001) TSC 8550-SWR Wax/Resin Ribbon 110 mm × 300 mP159051-001110 mm 300 m Wax/Resin Outside25.4 mm12,29 €+VATOut of stock View
    TSC 8050-SWX Wax Ribbon 60 mm × 300 m, Out, Black (P159031-001) TSC 8050-SWX Wax Ribbon 60 mm × 300 mP159031-00160 mm 300 m Wax Outside25.4 mm2,56 €+VATOut of stock View
    TSC 8300-PWX Wax Ribbon 60 mm × 300 m, Out, Black (P159032-001) TSC 8300-PWX Wax Ribbon 60 mm × 300 mP159032-00160 mm 300 m Wax Outside25.4 mm5,56 €+VATOut of stock View
    TSC 8550-SWR Wax/Resin Ribbon 60 mm × 300 m, Out, Black (P159033-001) TSC 8550-SWR Wax/Resin Ribbon 60 mm × 300 mP159033-00160 mm 300 m Wax/Resin Outside25.4 mm6,71 €+VATOut of stock View
    TSC 8580-PWR Wax/Resin Ribbon 60 mm × 300 m, Out, Black (P159034-001) TSC 8580-PWR Wax/Resin Ribbon 60 mm × 300 mP159034-00160 mm 300 m Wax/Resin Outside25.4 mm8,82 €+VATOut of stock View
    TSC 8600-SRE Resin Ribbon 60 mm × 300 m, Out, Black (P159035-001) TSC 8600-SRE Resin Ribbon 60 mm × 300 mP159035-00160 mm 300 m Resin Outside25.4 mm13,15 €+VATOut of stock View
    TSC 8770-PRE Resin Ribbon 60 mm × 300 m, Out, Black (P159036-001) TSC 8770-PRE Resin Ribbon 60 mm × 300 mP159036-00160 mm 300 m Resin Outside25.4 mm19,40 €+VATOut of stock View
    TSC 8050-SWX Wax Ribbon 83 mm × 300 m, Out, Black (P159037-001) TSC 8050-SWX Wax Ribbon 83 mm × 300 mP159037-00183 mm 300 m Wax Outside25.4 mm3,54 €+VATOut of stock View
    TSC 8300-PWX Wax Ribbon 83 mm × 300 m, Out, Black (P159038-001) TSC 8300-PWX Wax Ribbon 83 mm × 300 mP159038-00183 mm 300 m Wax Outside25.4 mm7,69 €+VATOut of stock View
    TSC 8550-SWR Wax/Resin Ribbon 83 mm × 300 m, Out, Black (P159039-001) TSC 8550-SWR Wax/Resin Ribbon 83 mm × 300 mP159039-00183 mm 300 m Wax/Resin Outside25.4 mm9,27 €+VATOut of stock View
    TSC 8580-PWR Wax/Resin Ribbon 83 mm × 300 m, Out, Black (P159040-001) TSC 8580-PWR Wax/Resin Ribbon 83 mm × 300 mP159040-00183 mm 300 m Wax/Resin Outside25.4 mm12,21 €+VATOut of stock View
    TSC 8600-SRE Resin Ribbon 83 mm × 300 m, Out, Black (P159041-001) TSC 8600-SRE Resin Ribbon 83 mm × 300 mP159041-00183 mm 300 m Resin Outside25.4 mm18,19 €+VATOut of stock View
    TSC 8770-PRE Resin Ribbon 83 mm × 300 m, Out, Black (P159042-001) TSC 8770-PRE Resin Ribbon 83 mm × 300 mP159042-00183 mm 300 m Resin Outside25.4 mm26,84 €+VATOut of stock View
    TSC 8050-SWX Wax Ribbon 90 mm × 300 m, Out, Black (P159043-001) TSC 8050-SWX Wax Ribbon 90 mm × 300 mP159043-00190 mm 300 m Wax Outside25.4 mm3,84 €+VATOut of stock View
    TSC 8300-PWX Wax Ribbon 90 mm × 300 m, Out, Black (P159044-001) TSC 8300-PWX Wax Ribbon 90 mm × 300 mP159044-00190 mm 300 m Wax Outside25.4 mm8,34 €+VATOut of stock View

    Compatible labels

    ProductSize (W × H) Material Labels / rollCorePrice
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 101.6 mm, H: 152.4 mm, D: 127 mm, C: 25.4 mm (800284-605) Zebra Z-Perform 1000D800284-605101.6 × 152.4 mm Thermal Paper 47525.4 mm19,50 €+VATIn stock
    Labels, Zebra, Thermal Paper, Z-Select 2000D, W: 57.15 mm, H: 31.75 mm, D: 127 mm, C: 25.4 mm (800262-125) Zebra Z-Select 2000D800262-12557.15 × 31.75 mm Thermal Paper 210025.4 mm14,06 €+VATIn stock
    Zebra Z-Select 2000D, label roll, thermal paper, premium coated, for desktop-printers, core 25,4mm, diameter 127mm, dimensions (WxH) 51x25mm, 2580 labels/roll, free of Bisphenol, free of Bisphenol A, free of Bisphenol S (880199-025D) Zebra Z-Select 2000D880199-025D51 × 25 mm Thermal Paper 258025.4 mm14,06 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 101.6 mm, H: 63.5 mm, D: 127 mm, C: 25.4 mm (3007206-T) Zebra Z-Select 2000T3007206-T101.6 × 63.5 mm Normal Paper 110025.4 mm16,48 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 50.8 mm, H: 25.4 mm, D: 127 mm, C: 25.4 mm (3007201-T) Zebra Z-Select 2000T3007201-T50.8 × 25.4 mm Normal Paper 258025.4 mm9,21 €+VATIn stock
    Zebra Z-Select 2000D, label roll, thermal paper, premium coated, for desktop-printers, core 25,4mm, diameter 127mm, dimensions (WxH) 76x51mm, 1370 labels/roll, perforated, free of Bisphenol, free of Bisphenol A, free of Bisphenol S (800263-205) Zebra Z-Select 2000D800263-20576 × 51 mm Thermal Paper 137025.4 mm17,84 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 57.15 mm, H: 31.75 mm, D: 127 mm, C: 25.4 mm (3006318) Zebra Z-Select 2000T300631857.15 × 31.75 mm Normal Paper 210025.4 mm10,74 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 101.6 mm, H: 50.8 mm, D: 127 mm, C: 25.4 mm (800274-205) Zebra Z-Select 2000T800274-205101.6 × 50.8 mm Normal Paper 137025.4 mm16,48 €+VATIn stock
    Labels, Zebra, Thermal Paper, Z-Select 2000D, W: 101.6 mm, H: 101.6 mm, D: 127 mm, C: 25.4 mm (800264-405) Zebra Z-Select 2000D800264-405101.6 × 101.6 mm Thermal Paper 70025.4 mm23,38 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 69.85 mm, H: 31.75 mm, D: 127 mm, C: 25.4 mm (3007205-T) Zebra Z-Select 2000T3007205-T69.85 × 31.75 mm Normal Paper 210025.4 mm12,47 €+VATIn stock
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 38.1 mm, H: 25.4 mm, D: 127 mm, C: 25.4 mm (880595-025DU) Zebra Z-Perform 1000D880595-025DU38.1 × 25.4 mm Thermal Paper 258025.4 mm11,76 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Perform 1000T, W: 69.85 mm, H: 38.1 mm, D: 127 mm, C: 25.4 mm (880013-038D) Zebra Z-Perform 1000T880013-038D69.85 × 38.1 mm Normal Paper 179025.4 mm11,14 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Perform 1000T, W: 38.1 mm, H: 25.4 mm, D: 127 mm, C: 25.4 mm (880003-025D) Zebra Z-Perform 1000T880003-025D38.1 × 25.4 mm Normal Paper 258025.4 mm7,99 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 76.2 mm, H: 50.8 mm, D: 127 mm, C: 25.4 mm (800273-205) Zebra Z-Select 2000T800273-20576.2 × 50.8 mm Normal Paper 137025.4 mm12,57 €+VATIn stock
    Labels, Zebra, Thermal Paper, Z-Select 2000D, W: 31.75 mm, H: 25.4 mm, D: 127 mm, C: 25.4 mm (800261-105) Zebra Z-Select 2000D800261-10531.75 × 25.4 mm Thermal Paper 258025.4 mm9,27 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 31 mm, H: 22 mm, D: 127 mm, C: 25.4 mm (3007200-T) Zebra Z-Select 2000T3007200-T31 × 22 mm Normal Paper 289025.4 mm7,07 €+VATIn stock
    Labels, Zebra, Synthetic, Z-Ultimate 3000T, W: 76.2 mm, H: 50.8 mm, D: 127 mm, C: 25.4 mm (880255-050D) Zebra Z-Ultimate 3000T880255-050D76.2 × 50.8 mm Synthetic 137025.4 mm61,73 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Perform 1000T, W: 50.8 mm, H: 25.4 mm, D: 127 mm, C: 25.4 mm (880007-025D) Zebra Z-Perform 1000T880007-025D50.8 × 25.4 mm Normal Paper 258025.4 mm8,54 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 57.15 mm, H: 50.8 mm, D: 127 mm, C: 25.4 mm (3007202-T) Zebra Z-Select 2000T3007202-T57.15 × 50.8 mm Normal Paper 137025.4 mm10,00 €+VATIn stock
    Labels, Zebra, Synthetic, Z-Ultimate 3000T, W: 101.6 mm, H: 50.8 mm, D: 127 mm, C: 25.4 mm (880261-050D) Zebra Z-Ultimate 3000T880261-050D101.6 × 50.8 mm Synthetic 137025.4 mm69,36 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 31.75 mm, H: 25.4 mm, D: 127 mm, C: 25.4 mm (800271-105) Zebra Z-Select 2000T800271-10531.75 × 25.4 mm Normal Paper 258025.4 mm7,07 €+VATIn stock
    Labels, Zebra, Synthetic, Z-Ultimate 3000T White, W: 38.1 mm, H: 12.7 mm, D: 127 mm, C: 25.4 mm (880243-012D) Zebra Z-Ultimate 3000T White880243-012D38.1 × 12.7 mm Synthetic 465025.4 mm36,06 €+VATIn stock
    Labels, Zebra, Synthetic, PolyPro 3000T Gloss, W: 101.6 mm, H: 152.4 mm, D: 127 mm, C: 25.4 mm (3012964) Zebra PolyPro 3000T Gloss3012964101.6 × 152.4 mm Synthetic 53325.4 mm37,37 €+VATIn stock
    Labels, Zebra, Synthetic, Z-Ultimate 3000T, W: 50.8 mm, H: 25.4 mm, D: 127 mm, C: 25.4 mm (880247-025D) Zebra Z-Ultimate 3000T880247-025D50.8 × 25.4 mm Synthetic 258025.4 mm44,37 €+VATIn stock
    Labels, Zebra, Synthetic, Z-Ultimate 3000T Silver, W: 50.8 mm, H: 25.4 mm, D: 127 mm, C: 25.4 mm (880269-025D) Zebra Z-Ultimate 3000T Silver880269-025D50.8 × 25.4 mm Synthetic 258025.4 mm46,55 €+VATIn stock
    Labels, Zebra, Thermal Paper, Z-Perform 1000D, W: 69.85 mm, H: 31.75 mm, D: 127 mm, C: 25.4 mm (880181-031D) Zebra Z-Perform 1000D880181-031D69.85 × 31.75 mm Thermal Paper 210025.4 mm15,13 €+VATIn stock
    Labels, Zebra, Normal Paper, Z-Select 2000T, W: 76.2 mm, H: 25.4 mm, D: 127 mm, C: 25.4 mm (800273-105) Zebra Z-Select 2000T800273-10576.2 × 25.4 mm Normal Paper 258025.4 mm13,09 €+VATIn stock
    Labels, Zebra, Synthetic, Z-Ultimate 3000T Silver, W: 38.1 mm, H: 19.05 mm, D: 127 mm, C: 25.4 mm (3006493) Zebra Z-Ultimate 3000T Silver300649338.1 × 19.05 mm Synthetic 372025.4 mm39,06 €+VATIn stock
    Labels, Zebra, Synthetic, Z-Ultimate 3000T, W: 69.85 mm, H: 31.75 mm, D: 127 mm, C: 25.4 mm (880253-031D) Zebra Z-Ultimate 3000T880253-031D69.85 × 31.75 mm Synthetic 210025.4 mm53,75 €+VATIn stock
    Labels, Zebra, Synthetic, Z-Ultimate 3000T, W: 57.15 mm, H: 31.75 mm, D: 127 mm, C: 25.4 mm (880249-031D) Zebra Z-Ultimate 3000T880249-031D57.15 × 31.75 mm Synthetic 210025.4 mm47,74 €+VATIn stock
    Labels, Zebra, Synthetic, 8100T CryoCool, W: 30 mm, H: 15 mm, D: 127 mm, C: 25.4 mm (3017014) Zebra 8100T CryoCool301701430 × 15 mm Synthetic 443025.4 mm75,35 €+VATIn stock
    Labels, Zebra, Synthetic, 8100T CryoCool, W: 51 mm, H: 25 mm, D: 127 mm, C: 25.4 mm (3017015) Zebra 8100T CryoCool301701551 × 25 mm Synthetic 270025.4 mm93,25 €+VATIn stock
    Foil labels 70x40 / 1000 pcs, 40 g, polypropylene acrylic glue 1 row external roll white color rounded corners Foil labels 70x40 / 1000 pcsKK01032770 × 40 mm Synthetic (PP) 100040 mm8,36 €+VATIn stock
    Foil synthetic 50x30 / 1000 pcs, 40 g, polypropylene,1 row, an external coil, adhesive, white gloss Foil synthetic 50x30 / 1000 pcsKK01031650 × 30 mm Synthetic (PP) 100040 mm6,96 €+VATIn stock
    Foil synthetic 43x30 / 1000 pcs, 40 g, polypropylene,1 row, an external coil, white glos Foil synthetic 43x30 / 1000 pcsKK01844743 × 30 mm Synthetic (PP) 100040 mm5,10 €+VATIn stock
    Foil synthetic 50x30 / 1000 pcs, 40 g, polypropylene,1 row, an external coil, acrilic adhesive, white gloss Foil synthetic 50x30 / 1000 pcsKK00028950 × 30 mm Synthetic (PP) 100040 mm6,96 €+VATIn stock
    Foil labels 80x90 / 800 pcs, 40 g, polypropylene, without glue, an external coil, white Foil labels 80x90 / 800 pcsKK00153980 × 90 mm Synthetic (PP) 80040 mm39,48 €+VATIn stock
    Foil labels 40x20 / 1000 pcs, 40 g, polyester,acrylic glue, an external coil, white matte, corners rounded Foil labels 40x20 / 1000 pcsKK00102040 × 20 mm Synthetic (PET) 100040 mm12,08 €+VATIn stock
    Paper direct thermal labels 100x170 / 250 pcs, 40 g, matte, acrilic glue, an external coil, white, corners rounded Paper direct thermal labels 100x170 / 250 pcsKK010247100 × 170 mm Thermal Paper 25040 mm8,36 €+VATIn stock
    Thermal labels 32x20 / 2000 pcs, 25 g, semi-gloss acrylic adhesive 1 row outer beam white color rounded corners, plastic core Thermal labels 32x20 / 2000 pcsKK00117632 × 20 mm Thermal Paper 200025 mm3,72 €+VATIn stock
    32x20 / 2000 pcs, 40 g, 32x20 / 2000 pcsKK00016532 × 20 mm 200040 mm3,26 €+VATIn stock
    Paper direct thermal labels 40x40 / 1000 pcs, 40 g, semi-glossy, acrilic glue, an external coil, white, corners rounded Paper direct thermal labels 40x40 / 1000 pcsKK00019340 × 40 mm Thermal Paper 100040 mm3,26 €+VATIn stock
    Thermal labels 50x30 / 1000 pcs, 40 g, semi-gloss acrylic adhesive 1 row outer beam white color rounded corners Thermal labels 50x30 / 1000 pcsKK00053850 × 30 mm Thermal Paper 100040 mm3,72 €+VATIn stock
    Paper thermal transfer labels 50x40 / 1500 pcs, 40 g, semi gloss, acrilic adhesive, 1 row, an external coil, white, rounded corners Paper thermal transfer labels 50x40 / 1500 pcsKK00014250 × 40 mm Normal Paper 150040 mm5,58 €+VATIn stock
    58x43 / 1000 pcs, 40 g, 58x43 / 1000 pcsKK00010358 × 43 mm 100040 mm4,18 €+VATIn stock
    60x40 / 1000 pcs, 40 g, 60x40 / 1000 pcsKK00126960 × 40 mm 100040 mm4,18 €+VATIn stock
    Thermal transfer labels 66x66 / 600 pcs, 40 g, semi-gloss acrylic adhesive 1 row an external coil color white rounded corners Thermal transfer labels 66x66 / 600 pcsEPKBA-0660/0660-206066 × 66 mm Normal Paper 60040 mm5,58 €+VATIn stock
    Thermal labels 70x60 / 1000 pcs, 25 g, semi-gloss acrylic adhesive 1 row outer beam white color rounded corners Thermal labels 70x60 / 1000 pcsKK00138770 × 60 mm Thermal Paper 100025 mm7,44 €+VATIn stock
    Paper thermal transfer labels 80x20 / 2000 pcs, 40 g, semi gloss, acrilic adhesive, 1 row, an external coil, white, rounded corners Paper thermal transfer labels 80x20 / 2000 pcsKK00012580 × 20 mm Normal Paper 200040 mm6,96 €+VATIn stock
    Paper thermal transfer labels 100x40 / 1000 pcs, 40 g, semi gloss, acrilic adhesive, 1 row, an external coil, white, rounded corners Paper thermal transfer labels 100x40 / 1000 pcsKK000272100 × 40 mm Normal Paper 100040 mm6,96 €+VATIn stock
    Paper direct thermal labels 100x50 / 1000 pcs, 40 g, semi-glossy, acrilic glue, an external coil, white, corners rounded Paper direct thermal labels 100x50 / 1000 pcsKK000203100 × 50 mm Thermal Paper 100040 mm7,44 €+VATIn stock
    Thermal labels 80x50 / 1000 pcs, 40 g, semi-gloss rubber adhesive 1 row outer beam white color rounded corners Thermal labels 80x50 / 1000 pcsKK00017980 × 50 mm Thermal Paper 100040 mm7,90 €+VATIn stock
    Thermal labels 80x50 / 1000 pcs, 40 g, semi-gloss acrylic adhesive 1 row outer coil color YELLOW rounded corners Thermal labels 80x50 / 1000 pcsKK00144280 × 50 mm Thermal Paper 100040 mm5,58 €+VATIn stock
    Paper thermal transfer labels 50x25 / 2000 pcs, 40 g, matte, acrilic adhesive, 1 row, an external coil, white, corners rounded Paper thermal transfer labels 50x25 / 2000 pcsKK00029750 × 25 mm Normal Paper 200040 mm5,58 €+VATIn stock
    Paper thermal transfer labels 100x60 / 500 pcs, 40 g, matte, acrilic adhesive, 1 row, an external coil, white, corners rounded Paper thermal transfer labels 100x60 / 500 pcsKK000060100 × 60 mm Normal Paper 50040 mm6,04 €+VATIn stock
    Paper thermal labels 100x70 / 800 pcs, 40 g, eco, acrilic adhesive, an external coil, white, corners rounded Paper thermal labels 100x70 / 800 pcsKK01715100 × 70 mm Thermal Paper (Eco) 80040 mm10,44 €+VATIn stock
    Paper thermal transfer labels 100x100 / 500 pcs, 40 g, semi gloss, acrilic adhesive, 1 row, an external coil, white, rounded corners Paper thermal transfer labels 100x100 / 500 pcsKK000202100 × 100 mm Normal Paper 50040 mm8,36 €+VATIn stock
    Thermal labels 100x150 / 500 pcs, 40 g, matt acrylic glue, outer beam, white color, rounded corners Thermal labels 100x150 / 500 pcsKK000121100 × 150 mm Thermal Paper 50040 mm11,60 €+VATIn stock
    Thermal labels 40x25 / 2000 pcs, 40 g, semi-gloss release adhesive 1 row outer coil rounded corners Thermal labels 40x25 / 2000 pcsKK00048840 × 25 mm Thermal Paper 200040 mm9,28 €+VATIn stock
    Thermal labels 30x10 / 2000 pcs, 40 g, eco acrylic adhesive 1 row outer beam white color rounded corners Thermal labels 30x10 / 2000 pcsKK00014830 × 10 mm Thermal Paper (Eco) 200040 mm4,18 €+VATIn stock
    Thermal labels 32x20 / 180 pcs, 25 g, eco acrylic adhesive 1 row outer beam white color rounded corners Thermal labels 32x20 / 180 pcsKK00079832 × 20 mm Thermal Paper (Eco) 18025 mm0,70 €+VATIn stock
    Paper thermal labels 32x20 / 2500 pcs, 25 g, eco acrilic glue, an external coil, white, corners rounded Paper thermal labels 32x20 / 2500 pcsKK00117732 × 20 mm Thermal Paper (Eco) 250025 mm6,04 €+VATIn stock
    Paper thermal labels 32x20 / 2000 pcs, 40 g, eco, acrilic adhesive, an external coil, white, corners rounded Paper thermal labels 32x20 / 2000 pcsKK00014732 × 20 mm Thermal Paper (Eco) 200040 mm3,72 €+VATIn stock
    Paper thermal labels 32x25 / 2000 pcs, 25 g, eco, acrilic adhesive, an external coil, white, corners rounded Paper thermal labels 32x25 / 2000 pcsKK01022732 × 25 mm Thermal Paper (Eco) 200025 mm2,88 €+VATIn stock
    Paper thermal labels 40x30 / 1000 pcs, 40 g, eco acrilic glue, an external coil, white, corners rounded Paper thermal labels 40x30 / 1000 pcsKK00146540 × 30 mm Thermal Paper (Eco) 100040 mm3,26 €+VATIn stock
    Thermal labels 50x25 / 1000 pcs, 40 g, eco acrylic adhesive 1 row outer beam white color rounded corners Thermal labels 50x25 / 1000 pcsKK00077050 × 25 mm Thermal Paper (Eco) 100040 mm4,64 €+VATIn stock
    Paper thermal transfer labels 50x35 / 1000 pcs, 40 g, eco acrilic glue, an external coil, white, corners rounded Paper thermal transfer labels 50x35 / 1000 pcsKK00137450 × 35 mm Normal Paper 100040 mm5,10 €+VATIn stock
    Paper thermal labels 55x80 / 500 pcs, 40 g, top, adhesive, an external coil, 1 row, white, rounded corners Paper thermal labels 55x80 / 500 pcsKK01595055 × 80 mm Thermal Paper (Top) 50040 mm5,86 €+VATIn stock
    Thermal labels 60x30 / 1000 pcs, 40 g, eco acrylic glue 1 row outer coil rounded corners white Thermal labels 60x30 / 1000 pcsETEBA-0600/0300-210060 × 30 mm Thermal Paper (Eco) 100040 mm4,42 €+VATIn stock
    Paper thermal labels 75x25 / 1000 pcs, 40 g, eco, acrilic adhesive, an external coil, white, corners rounded Paper thermal labels 75x25 / 1000 pcsKK00063575 × 25 mm Thermal Paper (Eco) 100040 mm4,64 €+VATIn stock
    Paper thermal labels 80x20 / 2000 pcs, 40 g, eco, acrilic adhesive, an external coil, white, corners rounded Paper thermal labels 80x20 / 2000 pcsKK00020980 × 20 mm Thermal Paper (Eco) 200040 mm9,28 €+VATIn stock
    Paper thermal labels 80x50 / 1000 pcs, 40 g, eco,acrilic adhesive, an external coil, 1 row, white, rounded corners Paper thermal labels 80x50 / 1000 pcsKK00020580 × 50 mm Thermal Paper (Eco) 100040 mm6,96 €+VATIn stock
    Paper thermal labels 100x60 / 500 pcs, 40 g, eco acrilic adhesive, an external coil, 1 row, white, corners rounded Paper thermal labels 100x60 / 500 pcsKK000115100 × 60 mm Thermal Paper (Eco) 50040 mm6,04 €+VATIn stock
    Thermal labels 100x100 / 500 pcs, 40 g, eco, acrylic adhesive, 1 row, outer coil, white, rounded corners Thermal labels 100x100 / 500 pcsKK000408100 × 100 mm Thermal Paper (Eco) 50040 mm8,36 €+VATIn stock
    Thermal labels 100x140 / 500 pcs, 40 g, eco, acrylic adhesive, 1 row, outer coil, white, rounded corners Thermal labels 100x140 / 500 pcsKK001310100 × 140 mm Thermal Paper (Eco) 50040 mm9,76 €+VATIn stock
    Label 100mm x 150mm White Direct Thermal Labels (360 pcs) Label 100mm x 150mm White Direct Thermal Labels (360 pcs)KK01673100 × 150 mm Thermal Paper 360—9,28 €+VATIn stock
    Paper direct thermal labels 102x40 / 930 pcs, 40 g, matte, acrilic glue, an external coil, white, corners rounded Paper direct thermal labels 102x40 / 930 pcsKK001687102 × 40 mm Thermal Paper 93040 mm6,04 €+VATIn stock
    Thermal labels 60x40 / 1000 pcs, 40 g, eco acrylic release adhesive 1 row outer coil color white rounded corners Thermal labels 60x40 / 1000 pcsKK01039560 × 40 mm Thermal Paper (Eco) 100040 mm6,50 €+VATIn stock
    Direct thermal labels 80x60 / 1000 pcs, core 40 removeable glue, 1 row, an external coil Direct thermal labels 80x60 / 1000 pcsKK00142880 × 60 mm Thermal Paper 100040 mm16,26 €+VATIn stock
    Paper thermal transfer labels 60x30 / 1000 pcs, 40 g, semi gloss, acrilic adhesive, 1 row, an external coil, white, rounded corners Paper thermal transfer labels 60x30 / 1000 pcsKK00003660 × 30 mm Normal Paper 100040 mm3,72 €+VATIn stock

    More Zebra ZD421 guides

    ZD421 ComparisonZebra ZD621 vs ZD421: which 4-inch desktop printer?5 min · Easy ZD411 ComparisonZebra ZD421 vs ZD411: 4-inch or 2-inch desktop printer?5 min · Easy ZD421 SetupZebra ZD421 setup guide: from unboxing to first label20 min · Easy ZD421 TroubleshootingZebra ZD421 lights and errors: what they mean and how to fix them10 min · Easy ZD421 How-toReset a Zebra ZD421 to factory defaults10 min · Easy ZD220 How-toPrint 100×150 mm shipping labels on Zebra ZD220, ZD230 and ZD42110 min · Easy
    Still stuck?

    Send us your model and a short description of the problem. Our team will help you find a solution.

    Contact support
    Zebra ZD421t Desktop Label Printer (ZD4A042-30EE00EZ)408,25 €+VAT View product